| Rule Violations |
Count |
| Clearance Constraint (Gap=6mil) (All),(All) |
0 |
| Short-Circuit Constraint (Allowed=No) (All),(All) |
0 |
| Un-Routed Net Constraint ( (All) ) |
0 |
| Modified Polygon (Allow modified: No), (Allow shelved: No) |
0 |
| Width Constraint (Min=5mil) (Max=50mil) (Preferred=6mil) (All) |
0 |
| Width Constraint (Min=6mil) (Max=50mil) (Preferred=10mil) (InNetClass('Power')) |
0 |
| Routing Via (MinHoleWidth=8mil) (MaxHoleWidth=20mil) (PreferredHoleWidth=10mil) (MinWidth=18mil) (MaxWidth=48mil) (PreferedWidth=24mil) (All) |
0 |
| SMD To Corner (Distance=1mil) (All) |
0 |
| SMD Neck-Down Constraint (Percent=90%) (All) |
0 |
| SMD Entry (Side = Allowed) (Corner = Allowed) (Any Angle = Not Allowed) (Ignore First Corner = Allowed) |
0 |
| Power Plane Connect Rule(Relief Connect )(Expansion=10mil) (Conductor Width=6mil) (Air Gap=6mil) (Entries=4) (All) |
0 |
| Hole Size Constraint (Min=1mil) (Max=100mil) (All) |
0 |
| Hole To Hole Clearance (Gap=10mil) (All),(All) |
0 |
| Minimum Solder Mask Sliver (Gap=2mil) (All),(All) |
0 |
| Silk To Solder Mask (Clearance=2mil) (IsPad),(All) |
0 |
| Silk to Silk (Clearance=4mil) (All),(All) |
0 |
| Net Antennae (Tolerance=0mil) (All) |
0 |
| Room Low Power Bluetooth PMOD RevC (Bounding Region = (1280mil, 1500mil, 3170mil, 2300mil) (InComponentClass('Low Power Bluetooth PMOD RevC')) |
0 |
| Component Clearance Constraint ( Horizontal Gap = 10mil, Vertical Gap = 10mil ) (All),(All) |
0 |
| Height Constraint (Min=0mil) (Max=1000mil) (Prefered=500mil) (All) |
0 |
| Total |
0 |
